Page Comparison

Preview is the window that video from the source can be viewed. You can watch view any source in the on the Preview Screen.

• If you have more than one encoder, you will see that see separate sections appears on the preview window for each encoder as it is seen below. You must check the Encoder(s) which you want to enable preview. After checking encoder(s), selected encoder(s) appear(s) on the preview screen, unchecked  encoderencoder(s) couldn't do not display on the preview screen.

Image Removed  Image Added      Image RemovedImage Added

•  This button is used to take snaphot snapshots from current encoder at the time of encoding. Please see Snapshot - 3.2.0.0 to have detailed information about snapshot.
•  This button adjusts sets preview screen to Fullscreen mode. If you click this button , preview screen appears like this form as it seen You can see below.
  

...

• Image Added 

If you adjust

...

Preview in

...

full screen mode

...

appearing like below: 

Tools > Options > General > View > Check " Show action buttons in full screen mode (Start, Stop, Pause, Split) "

Image RemovedImage Added

If you want to exit from fullscreen mode, you must click  this   button (which appears on the preview screen after you chose Fullscreen Full screen mode) or click "Esc" button from the keyboard.

• You can adjust preview aspect ratio from of the preview screen as it is seen below. There are four options for this as “No change”“No change”, 1:1, 5:4 and 16:9. “No change” means; show preview screen as default which is depend depends on the capture card's settings. Other options will adjust the preview screen according to chosen ratio. These changes do not affect recordings. This is , they are only for previewing.

           Image Modified

• The Preview Screens Screen can be divided to set as four different formats. These are free, v. tile, h. tile and best fit.
  
• Free: In free mode you can replace the preview screens and adjust their size free.

Image RemovedImage Added

Vertical Tile: The preview screens will be located vertically in Vertical Tile mode.

Image RemovedImage Added

Horizontal Tile: The preview screens will be located horizontally in Horizontal Tile mode.

Image RemovedImage Added

Best Fit: The Preview screens will be located in the Best fitting location.

Image RemovedImage Added

• You can

  adjust

  adjust preview screen size

  too

   too.

   Preview screen

   Preview screen size options

  are

  are 50%, 100%, 200%

  and

   and Fit

  size

   size. Fit means size is adjusted

  smoothly by ingest

  smoothly by Ingest.

  
  

   

• In

  On preview screen, there are some values over each encoder. At every encoder’s top,

  encoder name

  encoder name is shown. At the top right side, buffer bar is shown and it indicates the latency of ingest

  while encoding

  while encoding. If it gets higher

  than 100

  than 100, the bar turns to yellow, which means this situation is

  critical and

  critical and encoding should be stopped. At the left side, Vumeter is

  show

  shown. At the bottom right side,

   duration

   duration of the current file is seen.

  Image Removed
  
  Image Added
  
  
• Bottom bar of preview: 
  
  While not encoding, this bar is gray and duration shows 00:00:00:00.
  Image Removed
  Image Added
  
  While encoding, this bar turns to red and duration time keeps increasing until encoding stops or  pauses pauses.
  Image Removed
  Image Added
  
  When encoding paused, bar turns to yellow and duration stops increasing and waits.
  Image Removed
  While
  Image Added
  
  

  If you split while encoding, if encoding gets split, encoding stops and INGEST starts to record over a new file that’s why . that’s why duration resets and bar color which is red does not change.

   

   

Image Added        Image Added