Compression settings include different tabs which are Video, Muxer, Audio , Time Code , CC Settings, Video Filters and Streaming. Each tab has different kind of adjusting settings. At the right side, current details of compression settings can be seen as summary.
...
Most video formats have a quality setting bar and some of them have Online/Offline option. Online and Offline options refers to that the source is a living source (online) or just a video file at local machine or network (offline). Choose a mode wisely according to the source in use.
- If it’s online, the bar refers to a performance bar. As it is increased, application works with better performance but may sacrifice quality.
-If offline is chosen, this bar refers to quality this time since performance is not that important according to online sources. As quality bar increases, quality of encoding gets increase but may cause encoder to slow due to machine’s system.
Settings
In settings window, there are three tabs of setting which are Basic settings, Advanced settings and Miscellaneous. Detailed setting of a profile can be adjusted from this window. It should be considered carefully that not all adjustments are acceptable therefore user should have some knowledge about these settings. Settings window is shown below for Basic , Advanced and Miscellaneous Settings. You can adjust Video Format (resolution,frame rate, etc. ) Bitrate ( bitrate mode, target bitrate , etc. ) , Profile (Main, 4:2:2, High , Simple) , Level(Main , High , Low , High 1440), GOP Stracture , Picture Coding Style , Motion Estimation , Quantization Matrices, Input Format and Stream Stracture settings from this window.
White screen which is at the top of this window helps users while adjusting video settings. If an unacceptable action performed it warns user and writes what’s wrong and what should it be. For example , if you choose wrong level / frame rate combination it warns you as it seen below.
Another important thing about this window, do not go back to profiles window to edit anything before closing settings window.
...
If you click Muxer tab this window appears which is shown below. Any muxer from the list can be selected here and some muxers have their own settings which users can adjust according to their needs.
Muxer Types are seen at the picture on the left.
-MPEG TS : If you choose this muxer type , settings appear as it shown below.
-MP4 : If you choose this muxer type, settings appear as it shown below.
Settings
Muxer Settings window is shown below. It includes General , Delay , Pack , Video and Miscellaneous Options.
Audio Settings
...
-Do not Use : If you choose this selection , no setting selection appears.
- If Exist : If you choose this selection Type , Settings , Audio Process Settings appears. Destination audio type is chosen in here and a settings button appears below it.
Audio Types
AAC : If you choose AAC as audio type , Audio Settings window takes the form below. And you should choose AAC Type (LC , HE1 , HE2 ) , Bitrate Mode ( CBR , VBR ) , Sample Rate , Input Channels , Bit Count , Bitrate and Mpeg version.
Settings
Audio Settings window is shown below. You can adjust Audio Format Settings (Layer , Mode , Bitrate , etc. ) from this window.
Audio Process
...
There are two selection for audio process :
...
Use Audio Mixer :
...
If the profile is a one stream audio,
...
“Use Audio Mixer” is the option that should be used.
...
If you choose this section you can adjust Audio Mixer Settings. By default, ingest automatically assigns source channel to same destination source channel.
...
As long as source and target audio channel count matches, this default assigning fits so every
...
channel of source and target is used. If source and target audio channel count doesn’t match, ingest
...
only assigns the source channel which has the same target source channel ,leaves rest as empty.
- Use Channel to Stream :
There is another option as “Channel “Channel to Stream” Stream” which should be used when target stream is more than more than one. When this is selected, a new button appears as “channel to stream” and it pops up a new a new window for its settings. In this window, stream count can be adjusted. Ingest automatically assign automatically assign only first stream same as audio mixer. All other streams start as empty. They should be assigned be assigned manually.
Time Code Settings
You can encode time code inside video file. Time Code Settings tab is shown below. There are four selections (Custom , System , VTR , Time Code ) for Time Code Source as it shown at the second picture.
-If you choose Custom selection , you can enter TC manually as it seen above at the picture on the left.
...
CC Settings, simply stands for Closed Caption settings. If source has CC, user can use CC or choose not use CC by adjusting this settings. CC Settings tab is shown below. There are two selections for Use CC which are "Not In Use" and "Copy Source CC If Exist" .
Video Filters Settings
...
Video Filter Settings tab is shown below. There are three filters which are ;
- 1-Aspect Ratio Corr. : When When youchoose Aspect Ratio Corr. , Video Filters tab appears like the following picture. When encoding, if source sizes and the target profile sizes are different, this option helps to chose how to change this resolution difference. These changes should not be changed if information of the source file is not known well. There are three conversion method for Aspect Ratio Corr. which are ;
-Do Nothing , simply extends video simply extends video due to the target resolution.
- 1-Aspect Ratio Corr. : When When youchoose Aspect Ratio Corr. , Video Filters tab appears like the following picture. When encoding, if source sizes and the target profile sizes are different, this option helps to chose how to change this resolution difference. These changes should not be changed if information of the source file is not known well. There are three conversion method for Aspect Ratio Corr. which are ;
...
-Letter Box , adds black rectangular to rears or bottom and top of video due to target resolution.
-Crop Crop , simply simply crops from video’s rears or bottom and left side due to target resolution. Crop is recommended is recommended to use if the source video is already did “letter box” before. This way, black rectangular black rectangular parts are removed.
Source Aspect Ratio
If you choose Letter box or Crop , one more selection appears as it seen in the picture on the right. You can choose Source Aspect Ratio from this selection. ( Square pixels , 4x3 , 16x9 , Custom)
-Square pixels: It’s not true that all pixels are square; in some video format pixels are rectangular. So So, for example a video with resolution 500x500 do not have square frames but rectangular. So, if user if user is sure that source video pixels are square than he/she can select square pixels from the list.
-4x3 / 16x9: These are the most common aspect ratios. If the source video’s aspect ratio is one of theseof these, user should select it.
-Custom: If aspect ratio of the source is not one of these, user can write aspect ratio manually. When When custom is selected, a text bar appears below and ratio should be written down here with a “x” a “x” in middle of it and without space. For example 4x5, 16x10 etc.
Sample 1:
Let’s say, source file is a standard video while the profile is chosen as a widescreen. Suppose this is a frame from original source video. How these options will change this frame is shown below.
Frame of original video
Do nothing:
Do Do nothing option directly converts the frame to wide screen which may result in images getting larger getting larger horizontally. If any shape change is not wanted meaning all rates should be same then letterbox letterbox or crop should be used.
Letter Letter box:
Letter box option adds black rectangular at both side of video to change size as needed. So with this method, original video’s ratios are not affected.
Crop Crop:
Simply Simply crops equal parts from top and bottom side of video to change size as needed. This method requires method requires sacrificing these parts of video so if these parts are essential this method should be used.
Sample 2:
This This time, suppose that the original source is a widescreen and target profile is a standard video.
Original Original frame:
Do nothing:
In In here, do nothing directly adjust the frame according to target resolution. This may cause images seems images seems thinner. Letter box or crop should be used if images ratios are important.
Letter Letter box:
Letter Letter box option, adds black parts to top and bottom side of frames to change the size as needed. Ratios Ratios of images do not change.
Crop:
Crops Crops equal parts from both sides of video to change the size of video as needed. This method requires method requires sacrificing these parts of video so if these parts are essential this method should be used.
- 2-Cropping : Cropping is another option which is very different from crop option in aspect ratio corr. settings.Using this option, users can crop frames manually according to their needs. Sometimes, some videos some videos have some unnecessary parts at their sides. With this option, videos can be cropped horizontally cropped horizontally and/or vertically. Users should only need to type how many pixel rows or columns should columns should be cropped. When you choose Cropping section Video Filter tab appears like the following picture.
...
- 3-Frame Rate Adapter :
One important thing is that if cropping and aspect ratio correction are used at the same time user is responsible for defining source aspect ratio due to cropping. Because cropping will be done first and after that aspect ratio correction is done and user should enter source aspect ratio of cropped video.
Stream Settings
Stream Settings tab is shown below. You You can enable streaming enable streaming by checking the box of “Enable”. After of “Enable”. After that , you can adjust Network Settings which are ;
-Origin
-Destination
-Port
-Band Width
For more information about Streaming , please see Streaming - 3.2.0.0 .
Save Profile
All the default presets exist to help users to find their target profile easily. When a profile is edited according to user needs, it can be saved to be used ahead. At bottom of profile window, a name can be written to save your profile as and when clicked “Save As” a folder browser appears. In this folder browser, a new file can be created to hold saved information. A file name should be written and “Save” button should be clicked. Eventually, a new preset will be added to default one.
