Page Comparison

...

Look at the picture below to see Archive Server Settings.

 

Image RemovedImage Added

 

Status
colour Yellow title 1

 It shows the connected Archive Server Name and State (Connected / Disconnected) . 

...

                       To add another MAS server press the Add Server button and browse in the network to point the machine which will be the second MAS server. Select it from the opening menu.  On each   MAS server machine , the Metus Archive Server service must be running (Metus Archive Server.msi must be installed there)

 

Image RemovedImage Added

 

Status
colour Yellow title 6

 Remove Server : This button is used to Remove selected Archive Server.

...

Status
colour Blue title 7

 Add Disk : This button is used to Add Disk to MAS.

 

Image RemovedImage Added

 

Status
colour Red title 8

 Manage : On later stage, if some of the Metus MAM clients have problems with reaching this machine, you can edit it by pointing its real or alternative IP address. So, select the MAS server from the list and press the Manage button. Enter the IPs here.

 

Image RemovedImage Added

Status
title 9

 Move Up / Move Down : These buttons are used to re-order the MAS servers in the list.

...

Status
colour Yellow title 11

 Add Remote Storage : Metus Archiving System is able to use network shares, NAS etc. as storage units to archive to. The remote storages behave like local disks. When your local storage is full you can add additional remote storage to have more free space. Please, keep in mind that each additional space used must be included in the license for the storage capacity to be supported. When sharing storage, press the Add Remote Storage button and you will see the GUID generated by Metus MAM – use it to name the share like this.

 Image RemovedImage Added

 

In the Share Path field, in front of the GUID enter the IP of the PC where is the space that will be used as additional storage (the share). Create a user and give him full permissions for working with this share. Enter his name as Share User and his Password in the next field. From the Diskset menu choose how to label the shared storage – Primary, Secondary, etc.

...